TECHNOVACUUM

NEW TECHNOLOGY RESEARCH INNOVATION

 
Vacuum creating systems
based on vacuum hydrocirculating (VHC) units

Jet compression units
for handling of flare, associated petroleum and other low-pressure gases

 
Jet absorbtion gas cleaning units
for removal of hydrocarbons from breathing gases and recovery of oil gases and oil products gases

 
Jet devices:
ejectors and injectors of various purpose







Technovacuum Ltd.
(495) 956-76-21
(499) 261-99-98
(499) 267-82-03
Russia, 105082, Moscow
B.Pochtovaya str., 26 "B", build.2, 5-th floor, office 1, room 11A
 

Questionnaire
for preparation of technical proposal for delivery of jet device
(ejector, injector)

Company
Name
Address
Phone
Fax
E-mail
Period for preparation of technical proposal (minimum 2 weeks):
1. Purpose of works:

delivery of jet device for new unit,
delivery of jet device for existing unit.

2. Purpose of jet device:
3. Characteristics of suction (passive, ejected) fluid:

3.1 Flowrate of suction fluid: kg/h

with range from % up to %

3.2 Composition of suction fluid (concentration in %mass., %mol.):
Chemical formula
 Concentration
 Mol. weight
 
Chemical formula
 Concentration
 Mol. weight

3.3 Temperature of suction fluid - °C.

3.4 Pressure of suction fluid - Atm. abs.

4. Characteristics of motive (active, ejecting) medium:

4.1 Flowrate of motive fluid: kg/h

with range from % up to %.

4.2 Composition of motive fluid (concentration in %mass, %mol.):
Chemical formula
 Concentration
 Mol. weight
 
Chemical formula
 Concentration
 Mol. weight

4.3 Temperature of motive fluid - °C.

4.4 Pressure of motive fluid - Atm. abs.


5. Pressure at outlet of jet device:

Atm. abs.

6. Operating conditions of jet device:

6.1 Operating mode of jet device:

continuous,

cyclic - indicate the average operating hours per day: hours.

6.2 Run length - operating hours.

6.3 External or internal installation.



By filling in this Questionnaire I agree with handling of my personal data in compliance with the Federal law No. 152-FZ of 27.07.2006 (edition of 29.07.2017) “About Personal Data” on conditions and for purposes determined by policy of confidentiality.

  

 

Download Questionnaire (for MSWord).


 




Design RICO Perevod
Technovacuum © 2006