TECHNOVACUUM

NEW TECHNOLOGY RESEARCH INNOVATION

 
Vacuum creating systems
based on vacuum hydrocirculating (VHC) units

Jet compression units
for handling of flare, associated petroleum and other low-pressure gases

 
Jet absorbtion gas cleaning units
for removal of hydrocarbons from breathing gases and recovery of oil gases and oil products gases

 
Jet devices:
ejectors and injectors of various purpose







Technovacuum Ltd.
(495) 956-76-21
(499) 261-99-98
(499) 267-82-03
Russia, 105082, Moscow
B.Pochtovaya str., 26 "B", build.2, 5-th floor, office 1, room 11A
 

Questionnaire
for preparation of technical proposal for delivery of jet absorption gas cleaning unit for tank breathing gases

Company
Name
Address
Phone
Fax
E-mail
Period for preparation of technical proposal (minimum 2 weeks):
1. Purpose of works:

delivery of jet absorption gas cleaning unit for new tanks,
delivery of jet absorption gas cleaning unit for existing tanks.

2. Purpose of process unit being a source of gases delivered for sweetening:
3. Characteristics of vapor pumped by jet absorption gas cleaning unit*:

* When data about pumped vapor is not available, please, fill in the questions of
   the Articles 4.1-4.8.

3.1 Flowrate of pumped vapor: kg/h

with range from % up to %

3.2 Composition of pumped vapor (Concentration in %mass, %mol):
Chemical formula
 Concentration
 Mol. weight
 
Chemical formula
 Concentration
 Mol. weight

3.3 Maximum temperature in the tank - °C.

3.4 Minimum set pressure of vent valves - Atm. abs.

3.5 Maximum set pressure of vent valves - Atm. abs.

 

4. Characteristics of products contained in the tanks:

(for gasolines, please, indicate a brand instead of p. 4.1-4.4)

4.1 Assay of crude oil contained in the tanks (TBP) with indication of component-wise composition of gases up to Ń5 inclusive:

Chemical formula
 Concentration
 Mol. weight
 
Chemical formula
 Concentration
 Mol. weight
 
Chemical formula
 Concentration
 Mol. weight

4.2 Temperature of crude oil delivered to the unit - °C.

4.3 Density at 20°C - kg/m3.

4.4 Viscosity at 20°C - sSt.

4.5 Minimum flowrate of filling tanks equipped with jet absorption gas cleaning unit (indicate the pump brand) - m3/h.

4.6 Maximum flowrate of pumping of tanks equipped with jet absorption gas cleaning unit (indicate the pump brand) - m3/h.

4.7 Number and volume of tanks for each kind of product:

(Please, indicate separately any pontoons, floating roofs, etc.)


5. Characteristics of energy resources:

5.1 Electricity

5.1.1 Voltage - V,

5.1.2 Current frequency - Hz,

5.1.3 Number of phases - .



By filling in this Questionnaire I agree with handling of my personal data in compliance with the Federal law No. 152-FZ of 27.07.2006 (edition of 29.07.2017) “About Personal Data” on conditions and for purposes determined by policy of confidentiality.

  

 

Download Questionnaire (for MSWord).


 




Design RICO Perevod
Technovacuum © 2006